Product ID:HOT MELT ADHESIVE, 61-1025
MSDS Date:07/12/1990
FSC:8040
NIIN:00N042794
MSDS Number: BRSDK

WORTHEN INDUSTRIES

3 EAST SPIT BROOK RD
NASHUA, NH 03060
US

Emergency Phone: 800-424-9300(CHEMTREC)

Info Phone: 603-888-5443

Cage: 56612

WORTHEN INDUSTRIES

NASHUA, NH 03060 US

Telephone: 603-888-5443

Cage: 56612

PARAFFIN WAX

CAS: 64742-43-4

PARAFFIN; (SYNTHETIC WAX)

CAS: 8002-74-2

RTECS: RV0350000

BENZENEPROPANOIC ACID,

CAS: 6683-19-8

RTECS: DA8340900

HYDROXYPHENYL)-1-OXOPROPOXY)METHYL)-1,3-PROPANEDIYL

RTECS: 9999999ZZ

EVA COPOLYMER

CAS: 24937-78-8

OSHA PEL N/K

ACGIH TLV: N/K

THERMOPLASTIC HYDROCARBON RESIN

CAS: 9011-11-4

OSHA PEL N/K

ACGIH TLV: N/K

LD50 LC50 Mixture:NONE LISTED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INHALATION IS NOT POSSIBLE IF MATERIAL
IS IN SOLID FORM. IF MOLTEN, OVEREXPOSURE WILL CAUSE HEADACHE.
EYES: SOLID MATERIAL HAS NO EFFECT. MOLTEN MATERIAL CAN IRRITATE
AND BURN IF IN DIRECT CONTACT. SK IN: SOLID MATERIAL HAS NO EFFECT.
MOLTEN MATERIAL WILL BURN UNTIL POLYMER IS COOL. INGESTION: SOLID
(EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:HEALTH HAZARDS: MATERIAL HAS NO EFFECT. MOLTEN
MATERIAL WILL BURN INTENSELY. IF PERSONAL CONTACT WITH MOLTEN
MATERIAL PRODUCES A BURN SEE PHYSICIAN OR BURN CENTER IMMEDIATELY.
Medical Cond Aggravated by Exposure:HEADACHES.

First Aid:INHAL: REMOVE TO FRESH AIR. EYES: RINSE WITH COLD WATER IMMED
FOR AT LST 15 MINUTES AND SEE PHYS IMMED. SKIN: IMMED SUBMERGE
BURNED SKIN AREA IN COLD CLEAN WATER. DO NOT ATTEMPT TO PULL AWAY
SOLIDIFIE D MATL ADHERING TO SKIN. SEEK MED ATTN.INGEST: BRING TO
HOSPITAL IMMED. MATL AT ROOM TEMP IS SOLID MATL BUT IS NORMALLY
USED AS HOT MELT, SO TREAT ANY PERSONAL CONT W/MOLTEN MATL AS
NORMAL BURN.

Flash Point:<400F,<204C
Extinguishing Media:FOAM, CARBON DIOXIDE, DRY CHEMICAL.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:COOLING WITH WATER WILL SOLIDIFY MATERIAL
VERY RAPIDLY. NO UNUSUAL FIRE AND EXPLOSION HAZARDS ARE KNOWN.

Spill Release Procedures:NORMAL HOUSEKEEPING FOR SOLID MATERIAL. CLEAN
MACHINERY OF RESOLIDIFIED MATERIAL WITH SOLVENT, TAKING CARE TO
ELIMINATE ALL HEAT AND SPARK SOURCES. FOR LARGE SPILLS OF MOLTEN
LIQUID, ALLOW TO SOLIDIFY AND SCRAPE UP.
Neutralizing Agent:NONE LISTED BY MANUFACTURER.

Handling and Storage Precautions:NOT APPLICABLE IN SOLID FORM. REVIEW
EMERGENCY AND FIRST AID PROCEDURES BEFORE HANDLING MOLTEN
MATERIALS.
Other Precautions:NONE IN SOLID FORM.

Respiratory Protection:NOT REQUIRED FOR NORMAL USAGE CONDITIONS WITH
ADEQUATE VENTILATION. WEAR NIOSH/MSHA APPROVED RESPIRATOR
APPROPRIATE FOR EXPOSURE OF CONCERN .
Ventilation:LOCAL EXHAUST IF USED IN CONFINED AREA. MECHANICAL
VENTILATION REQUIRED FOR LARGE VOLUME USE.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:CHEMICAL SAFETY GOGGLES .
Other Protective Equipment:FULL BODY COVERING CLOTHES IF SPLASHING OR
SPRAYING MOLTEN MATERIAL.
Work Hygienic Practices:ALWAYS HANDLE CHEMICALS WITH CARE. BE SURE TO
HAVE EYE RINSE AND SHOWER STATION WITHIN WORKING AREA.
Supplemental Safety and Health
EVAPORATION RATE: N-BUTYL ACETATE.

HCC:N1
Vapor Density:HVR/AIR
Spec Gravity:0.8 (H2O=1)
Evaporation Rate & Reference:SLOWER THAN (SUPP DATA)
Solubility in Water:NONE
Appearance and Odor:CLEAR TO AMBER SLATS OR PELLETS.

Stability Indicator/Materials to Avoid:YES
NONE.
Stability Condition to Avoid:NONE.
Hazardous Decomposition Products:ON THERMAL DECOMPOSITION IT MAY EMIT
TOXIC FUMES, INCLUDING CARBON MONOXIDE AND/OR CARBON DIOXIDE.

Waste Disposal Methods:NORMAL DISPOSAL FOR SOLID WASTE AS MIGHT BE USED
FOR OTHER PLASTIC MATERIALS SUCH AS POLYETHYLENE. DISPOSE OF IN
ACCORDANCE WITH ALL LOCAL, STATE AND FEDERAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.